Double Glazed Door Lock Replacement
It can be difficult to replace a double-glazed door lock however it's not that difficult with the appropriate tools. The replacement of your window lock will improve the energy efficiency of your office or home and also provide additional security.
Take off the screw that holds the faceplate of the lock cylinder. Then, using a screwdriver, twist it to the left and remove the cylinder.
Replacement cylinders
Euro lock door cylinders or barrel locks, can be found in almost all uPVC double glazed doors, and are a proven source of security and dependability. A cylinder might need to be replaced due to a lost or stolen key, but it could also be due to the aging and corrosion. Cylinders come in a variety of sizes and styles, as well as finishes to match your door. Based on your requirements you can select between cylinders with 1-star or 3-star ratings that are secured by insurance endorsed Kitemarks from BSI.
Cylinder locks are built on simple pin and barrel systems which have been in use for many years in the majority, if not all uPVC doors. However, the drawback of these locks is that they are easily manipulated by burglars who use tools to "snap" them and gain entry to your home. We recommend replacing your cylinders using anti-snap cylinders to protect against this common method of burglary.
To remove the old cylinder, first open the door. Then locate the screw on the edge of the door between the outer handle and the handle inside. The screw is usually colored differently and will stand out in comparison to the other screws. The screw can be removed completely with the help of a screwdriver. If the screw isn't moving, try applying 3 in 1 oil and letting it sit for an hour. This may help, alternatively you could chisel into head of the screw in the 'unscrew' direction to slam it loose.
After removing the screws for the handle, loosen the cylinder by turning it in either direction (the direction will differ based on the side of the door the locking mechanism is located). Once the cylinder is loosened, pull it towards you and remove it. Measure the cylinder's width and length prior to buying a replacement.
We offer a variety of standard type half and full cylinders as well as a selection of security cylinders with specialized features that are both rated for anti-snap and bump resistance. These cylinders are BSI kitemarked, Secured by Design accredited and provide high levels of physical security for your home.
Replacement handles
There are a variety of colours and styles to choose from when replacing the handles on an uPVC door. But the most important thing to remember is that the new handle is positioned correctly. The screw size as well as the keyhole size must match. Use our handy guide to take measurements of uPVC handles. This will enable you to take the most precise measurements and ensure you buy the correct handle. It's also worth thinking about upgrading to a high security set of handles. This will ensure your door is secure and can help keep potential thieves from being able open the locks on your uPVC front doors.
Most major uPVC handle manufacturers have replacement handles for double glazed doors. Companies like ERA Avocet Millenco provide a wide range of lever and lever-lever handles available in various finishes. You can even pick the lever handle with a snib option for extra security.
Depending on the type of replacement you require in the future, you may need to replace the entire handle or just the lever. This is often due to wear and tear, but could also be due to a problem with the lock mechanism. If you're having issues with your lock, it's best to get in touch with an Locksmith to fix the problem for you, however If it's the handle that to be replaced, you can do this yourself.
After you have made your measurements, you can then compare them to the dimensions of replacement handles available on the market. The most commonly used size is the 92pz handle but there are also 68pz and 70pz handles available for uPVC doors. The new handle should have a backset as well as a faceplate that are compatible. This will ensure that the screw holes are aligned correctly and won't cause damage to the lock inside the door.
If you're replacing the handles on your doors and wish to upgrade to a greater level of security, then it's recommended that you consider Sold Secure SS301 or a 2* Kitemark set of handles. These handles are safe since they've been approved by the police and have anti-drilling and anti-picking features.
Faceplates for replacement
Door keeps and faceplates act as a last line of defense against burglars. They signal to burglars that your home is safe and stop them in their tracks. As such, they have a significant role to play and should be purchased from a reputable hardware store, either online or in person. This will ensure that you receive a durable device that will shield your windows and doors from damage and corrosion over time.
It is also important to be aware of the distinctions between a multipoint uPVC lock and single point locks, they may differ just as much as apples and oranges. Depending on the type of lock you are installing you will have to select the right backset and faceplate, a 'backset' is the distance between the edge of the door and the center of the handle or cylinder, and a 'faceplate' is a metal strip that is used to cover edges of the mechanisms. These are the most important elements that determine the parts you will need to replace for your new uPVC locking system. Then repairmywindowsanddoors.co.uk 's just a case of following the easy instructions for installing them!
Replacement locks
Depending on the style you prefer, there are different options when it comes time to change the locks on your uPVC door. They are usually made to withstand pressure and offer greater security for your home. There are uPVC multipoint locking systems designed for commercial use. They are typically provided by reputable companies, such as Fullex center lock gearboxes and Gardinia UPVC door locks.
When choosing a new lock for your window, be aware of the type of backset that you require as well as the faceplate you require. To ensure that the lock is secure and fits correctly and is compatible with your existing lock, ensure that you match these. For instance, if the current lock has a 35mm backset, and split spindle, it may be advisable to buy a new uPVC door handle with a compatible gearbox, like the Laird Saracen Surelock.
It is also important to ensure that the lock you select matches the size of the handle and faceplate holes in your existing windows. This is vital to ensure seamless integration of the window lock and handle.
Install the new lock in your window once you have selected the right one. It is a good thing to talk to your local locksmith in this process. They can help you find the right lock. Also, you should test the new lock.
To prevent this from happening, you should replace your double-glazed windows with locks of top quality that is resistant to forced entry. This will safeguard your valuables and keep your family members safe from burglars. Replacing window locks will improve the security of your home at a an affordable cost. It can be a challenge for those who aren't familiar with the procedure. To complete the task successfully it is essential to adhere to these steps with care.